Penerapan Model Simulasi Kemudi Kapal untuk Mata Kuliah Elektronika
Abstract
One of the implementations of project-based learning for electronics courses at the Indonesian State Maritime Polytechnic campus is carried out by making ship steering equipment based on one of the learning outcomes in electronics courses for the Engineering department, namely mastering the basics of electricity, electronics, hydraulics, and pneumatics related to ship control systems. Learning with this method can be applied online and offline, where the government’s budget efficiency is to reduce equipment and maintenance spending. Proteus software, which is open-source software that can be downloaded for free, is used to reduce the cost of purchasing electronic components. In addition, cadets do not need to buy components to minimize the cost of purchasing electronic components. Learning begins with the theory of ship steering simulation by demonstrating ship steering consisting of potentiometer components, Arduino, and connected to a computer via USB serial to view the data on the computer, followed by students practicing doing the project by starting by downloading and installing Proteus software, downloading and installing Arduino IDE software then continuing to create a potentiometer circuit, Arduino and serial monitor using Proteus software. In doing this project, students must learn independently by looking for guides and literature that can be searched on the internet or YouTube. This ship steering simulation model or prop is the result of DAPTV research, which explains ship steering simulation to students in the Engineering department in electronics courses at a low cost.
Downloads
References
BPK RI, “Instruksi Presiden (Inpres) Nomor 1 Tahun 2025.” Accessed: Mar. 9, 2025.
L. H. Nirmayani and N. P. C. P. Dewi, “Model Pembelajaran Berbasis Proyek (Project Based Learning) Sesuai Pembelajaran Abad 21 Bermuatan Tri Kaya Parisudha,” J. Pedagogi Dan Pembelajaran, vol. 4, no. 3, pp. 378–385, 2021.
P. Gede Sugiartawan Bayu, G. Nurhayata, and W. Sutaya, “Penerapan Model Project Based Learning Untuk Meningkatkan Hasil Belajar Siswa Pada Pelajaran Penerapan Rangkaian Elektronika Kelas XI TAV 1 Di SMK Negeri 3 Singaraja,” J. Pendidik. Tek. Elektro Undiksha, vol. 7, no. 3, pp. 134–142, 2018, doi: doi.org/10.23887/jjpte.v7i3.20862.
C. Oriza, Elfizon, and S. Islami, “Efektivitas Project based Learning pada Mata Kuliah Praktek Instalasi Listrik Industri,” Jupit. J. Pendidik. Tek. Elektro, vol. 4, no. 2, pp. 19–24, 2019, doi: https://doi.org/10.25273/jupiter.v4i2.5163.
Ridwan, M. Nurmanita, and N. M. Sangi, “Efektivitas Pembelajaran Simulasi Proteus 8 Professional Berbantuan Virtual Laboratory untuk Meningkatkan Berpikir Kritis MahasiswaPraktek Instalasi Listrik,” J. Teach. Educ., vol. 3, no. 3, pp. 53–64, 2022.
M. D. D. Wiguna, I. P. S. Arsa, and I. G. Ratnaya, “Pengembangan Media Pembelajaran Trainer Pengendali Elektromagnetik Berbasis Smart Relay Pada Instalasi Motor Listrik,” J. Pendidik. Tek. Elektro Undiksha, vol. 9, no. 3, pp. 203–212, 2020, doi: https://doi.org/10.23887/jjpte.v9i3.23653.
Kementerian Pendidikan Riset dan Teknologi, “Panduan Operasional PAK.” Accessed: Oct. 15, 2024.
A. R. Suharso, G. B. Santoso, A. Hendartono, and R. B. Kumara, “Perbandingan Sensor Incremental Rotary Encoder dan Potensiometer pada Simulasi Kemudi Kapal Berbasis Arduino,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 11, no. 1, pp. 155–166, 2023, doi: https://doi.org/10.26760/elkomika.v11i1.155.
P. D. Anggraini and S. S. Wulandari, “Analisis Penggunaan Model Pembelajaran Project Based Learning Dalam Peningkatan Keaktifan Siswa,” J. Pendidik. Adm. Perkantoran JPAP, vol. 9, no. 2, pp. 292–299, 2021, doi: https://doi.org/10.26740/jpap.v9n2.p292-299.
Syaminan, “Pengembangan Pembelajaran Teknik Digital Dengan Media Perangkat Lunak Proteus Dan Emulator Jurusan Teknik Informatika Universitas Kanjuruhan,” Spirit J. Comput. Cybernatic Syst., vol. 12, no. 2, pp. 41–45, 2020, doi: http://dx.doi.org/10.53567/spirit.v12i2.183.
I. G. A. S. Kajeng, I. G. Ratnaya, and W. M. P. Wiratama, “Penerapan Model PjBL (Project Based Learning) Berbantuan Alat Trainer Dalam Meningkatkan Hasil Belajar Instalasi Penerangan Listrik Siswa Kelas XI TKL-2 di SMK Negeri 3 Singaraja,” J. Pendidik. Tek. Elektro Undiksha, vol. 13, no. 2, pp. 116–129, 2024, doi: https://doi.org/10.23887/jjpte.v13i2.77340.
R. Sucilestari and K. Arizona, “Pengaruh Project Based Learning Pada Matakuliah Elektronika Dasar Terhadap Kecakapan Hidup Mahasiswa Prodi Tadris Fisika UIN Mataram,” KONSTAN J. Fis. Dan Pendidik. Fis., vol. 3, no. 1, pp. 26–35, 2018, doi: https://doi.org/10.20414/konstan.v3i1.4.
Copyright (c) 2025 Saintara: Jurnal Ilmiah Ilmu-Ilmu Maritim
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- The author retains the copyright and grants Saintara Journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (Read: The Effect of Open Access).
