Analisa Kinerja Reach Stacker dan Side Loader untuk Meningkatkan Produktivitas Box/Hm di PT. Mitra Dharma Laksana
Abstract
Container loading and unloading activities PT PBM Mitra Dharma Laksana uses reach stackers and side loaders to simplify the loading and unloading process of transporting and preparing containers. The company must manage the performance of reach stackers and side loaders to achieve the targeted box/hm productivity. This study aims to analyze the performance of reach stackers and side loaders in increasing container loading and unloading productivity. Data was collected by observation at the Meratus depot and analyzed descriptively. Based on data collected from January to December 2023, the analysis results show that the reach stacker has an average productivity of 22.58 boxes/hm, exceeding the target set (22 boxes/hm). The fact indicates that the side loader had a lower average productivity of 12.91 boxes/hm, which was short of the target, with periods of equipment breakdown from April to September, which affected overall productivity. The main factors influencing both machines’ performance were operational effectiveness, routine maintenance, and operator skills. Optimization of reach stacker management and side loaders of PT PBM Mitra Dharma Laksana can improve overall productivity, maintain machine performance stability, consistently meet operational targets, and fulfill operational targets consistently.
Downloads
References
W. Witasari, “Kelancaran Pemuatan Peti Kemas Di Depo Tanjung Tembaga Pt. Mitra Dharma Laksana Meratus Line Surabaya,” Karya Tulis, 2020.
M. Simanjuntak, S. Marzuki, and D. Arisanti, “Analisis Penghambat Stuffing in Terhadap Kelancaran Pemuatan Barang Di Depo Petikemas Tanjung Batu Pt Mitra Dharma Laksana Surabaya,” 2024, STIA Manajemen dan Kepelabuhan Barunawati Surabaya.
A. K. Devi and B. E. Yuwono, “Pengembangan Model Produktivitas Kegiatan Bongkar Muat Peti Kemas,” 2015.
P. Damongilala, A. Sutrisno, and J. Mende, “Pengukuran Kinerja Operasi Bongkar Muat Peti Kemas Di Pelabuhan Bitung,” J. Tekno Mesin, vol. 8, no. 1, pp. 5–11, 2022.
I. S. Kusumo, “Optimalisasi Kegiatan Bongkar Muat Container Di Mv. Spil Niken,” 2020, Sekolah Tinggi Ilmu Pelayaran.
M. E. Pratama, “Hubungan Utilisasi Alat Reach Stacker Dan Penumpukan Petikemas (Storage) Terhadap Produktivitas Depo Petikemas Di Depo Cdc 3 Cabang Tanjung Perak Surabaya,” 2020, STIA DAN MANAJEMEN KEPELABUHANAN BARUNAWATI SURABAYA.
N. Sarah, A. Ashury, and C. Paotonan, “Analisis Kinerja Operasional Peralatan Bongkar Muat Peti Kemas Di Pelabuhan Makassar,” Ris. Sains dan Teknol. Kelaut., pp. 100–103, 2018, doi: 10.62012/sensistek.v1i1.12989.
Hendra Wahyudin, Budaya Organisasi, vol. 1, no. 3. Prenada Media, 2022. doi: 10.57251/multiverse.v1i3.716.
H. A. A. Husien, “Pengaruh Stres kerja, Beban Kerja, dan Loyalitas Terhadap Produktivitas Karyawan Pada PT. RMK Energy, Tbk,” 2023, 021008 Universitas Tridinanti Palembang.
P. P. Kuantitatif, “Metode Penelitian Kuantitatif Kualitatif dan R&D,” Alf. Bandung, 2016.
S. Akunto, “Prosedur Penelitian: Suatu Pendekatan Praktek Praktek,” Rineka Cipta, vol. 2006, no. 2006, p. 197, 2002.
D. Wahono, “Terminal Petikemas pada Pelabuhan Internasional Pantai Kijing di Kecamatan Sungai Kunyit Kabupaten Pontianak,” JMARS J. Mosaik Arsit., vol. 3, no. 1, 2015.
Copyright (c) 2025 Saintara: Jurnal Ilmiah Ilmu-Ilmu Maritim
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- The author retains the copyright and grants Saintara Journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (Read: The Effect of Open Access).
